Skip to content
ELITE PETROTRADING & FACILITATION
PETROLEUM & ENERGY

Jet A-1 vs JP54: What Importers Should Know

By Elite Petro Trading Desk, Petroleum & Energy Division at Elite Petro Trading & Facilitation Published Last updated 5 min read

SHORT ANSWER

Jet A-1 is the internationally certified kerosene-type aviation turbine fuel, made to DEF STAN 91-091 and ASTM D1655 with a maximum freezing point of −47 °C. JP54 (Aviation Kerosene Colonial Grade 54) is a US pipeline kerosene grade broadly aligned with Jet A (freezing point max −40 °C); it is not automatically certified for into-plane use and is frequently misused in fraudulent offers.

Key takeaways

  • Jet A-1 freezing point is max −47 °C; Jet A and JP54 are max −40 °C.
  • Jet A-1 for airlines must comply with the Joint Inspection Group's AFQRJOS checklist and have full batch traceability.
  • JP54 is a Colonial Pipeline fungible grade, mainly used as blendstock, heating and industrial kerosene.
  • Many 'JP54' offers in the market are fraudulent: verify the seller, tank and documents.
  • Airport and airline buyers should only buy certified Jet A-1 with a Refinery Certificate of Quality.

Two names, two very different markets

Aviation fuel buyers regularly receive offers for both Jet A-1 and JP54. Both are kerosene-type fuels, both are clear liquids with similar density, and both can be burned in turbine engines. But in commercial aviation the difference between them is fundamental: one is a globally certified jet fuel with strict quality-assurance rules, the other is a pipeline grade with a much narrower legitimate market, and a long association with scam offers.

What is Jet A-1?

Jet A-1 is the standard fuel for commercial jet aircraft outside the USA. It is manufactured to two main specifications:

  • DEF STAN 91-091 (UK Ministry of Defence standard), and
  • ASTM D1655 (Standard Specification for Aviation Turbine Fuels).

In practice, airlines and airport fuel suppliers buy Jet A-1 that meets the AFQRJOS checklist (Aviation Fuel Quality Requirements for Jointly Operated Systems), maintained by the Joint Inspection Group (JIG). AFQRJOS combines the most stringent requirements of both standards.

Key Jet A-1 properties include:

PropertyJet A-1 requirement
Freezing pointmax −47 °C
Flash pointmin 38 °C
Density at 15 °C775 – 840 kg/m³
Total sulphurmax 0.30 % m/m
Aromaticsmax 25 % v/v
Specific energymin 42.8 MJ/kg
Thermal stability (JFTOT, 260 °C)Tube rating < 3, ΔP ≤ 25 mm Hg
Viscosity at −20 °Cmax 8.0 mm²/s

Equally important is traceability. Every batch must be traceable back to a Refinery Certificate of Quality (RCQ). Each time the fuel moves (refinery tank to ship, ship to terminal, terminal to airport) it is re-tested and recertified so that contamination is detected before it reaches an aircraft.

What is JP54?

"JP54" is a trade nickname for Aviation Kerosene Colonial Grade 54, a fungible kerosene grade shipped on the Colonial Pipeline in the United States. Its specification is broadly aligned with Jet A under ASTM D1655, with a freezing point of max −40 °C. Despite the "JP" prefix, it is not a military "JP" fuel (such as JP-5 or JP-8).

Legitimate uses of JP54 include:

  • blending component for jet fuel production (subject to certification);
  • heating kerosene;
  • industrial burner fuel and solvent applications.

JP54 is not automatically certified for into-plane use outside the US system. An airline outside North America needs Jet A-1 with AFQRJOS compliance and proper documentation.

Jet A-1 vs JP54 at a glance

FeatureJet A-1JP54 (Colonial Grade 54)
Main specificationDEF STAN 91-091 / ASTM D1655 (AFQRJOS)Colonial Pipeline Grade 54 (Jet A basis)
Freezing pointmax −47 °Cmax −40 °C
Main marketInternational airlines and airportsUS pipeline system, blending, heating
Certification chainRCQ + recertification at each transferVaries; must be verified
Fraud riskModerateVery high

Why the freezing point matters

At cruising altitude, outside air temperatures can fall below −50 °C. Fuel in the wing tanks cools during long flights, especially on polar and long-haul routes. A lower freezing point (−47 °C for Jet A-1) provides a safety margin against wax crystals forming and blocking fuel systems. This is why Jet A-1 is the international standard while Jet A (−40 °C) is used mainly within the USA, where routes and operating procedures account for the difference.

The JP54 fraud problem

JP54 is one of the most frequently used product names in fraudulent petroleum offers. Typical warning signs include:

  • huge monthly volumes (e.g. "2 million barrels × 12 months") from unknown sellers;
  • prices far below market benchmarks;
  • procedures requiring the buyer to pay for "tank storage", "dip tests" or "injection" before seeing product;
  • documents such as "tank storage receipts" or "ATSC" that cannot be verified with the named terminal;
  • refusal to allow an independent inspector of the buyer's choice.

The same applies to many Jet A-1 offers. As a rule, legitimate sellers do not ask buyers to pay fees in advance to personal accounts, and terminals will confirm directly whether a seller actually holds product. See our Anti-Fraud Notice and our guide on avoiding fraud in commodity trading.

What importers should ask for

  1. The exact specification: AFQRJOS issue number, DEF STAN 91-091 or ASTM D1655, not just "Jet A-1".
  2. Refinery Certificate of Quality and the chain of recertification documents.
  3. Origin documentation confirming a non-sanctioned refinery.
  4. Independent inspection at the load port by SGS, Intertek or Bureau Veritas.
  5. Clean tank certificates for the vessel or storage, and a defined previous-cargo history.
  6. Bank-to-bank payment terms such as a documentary letter of credit.

Which product should you buy?

If you are an airline, airport fuel farm or into-plane operator outside the US, buy certified Jet A-1 with full AFQRJOS traceability. If you need kerosene for heating, industrial burners or blending, and your specification is compatible, JP54 can be appropriate, but only from a verifiable seller with independent inspection.

Summary

Jet A-1 and JP54 are related fuels with different specifications and very different markets. Jet A-1 offers a lower freezing point and a rigorous certification chain designed for aviation safety; JP54 is a US pipeline kerosene grade with limited legitimate international demand and a high fraud risk. Specify precisely, verify everything, and use secure payment instruments.

Looking for aviation fuel? Request a quote for Jet A-1.

About the author: The Elite Petro Trading Desk (Petroleum & Energy Division) at Elite Petro Trading & Facilitation works daily with buyers, suppliers, inspectors and banks across the energy, agriculture and metals markets. This article is general information, not legal or financial advice; always confirm specifications and regulations for your transaction.

Jet Fuel A-1, petroleum & energy product supplied by Elite Petro
Energy

Jet Fuel A-1

Aviation turbine fuel (ATF), AFQRJOS compliant

HS 2710.19Details
Kerosene, petroleum & energy product supplied by Elite Petro
Energy

Kerosene

Superior kerosene oil (SKO) / dual-purpose kerosene

HS 2710.19Details
GET STARTED

Ready to Trade With Us?

Share your requirement (product, quantity, destination and Incoterm) and receive a formal offer from our team.