EN590 vs D2 Diesel: Key Differences for Buyers
SHORT ANSWER
EN590 is an ultra-low sulphur automotive diesel (10 or 50 ppm sulphur, cetane number ≥ 51) made to the European standard EN 590, while Gas Oil D2 is an industrial-grade diesel traded to GOST 305 or an equivalent specification, with sulphur up to about 0.2 % and a lower cetane number (≥ 45). EN590 is required for modern road vehicles; D2 suits boilers, generators and older engines.
Key takeaways
- EN590 sulphur is capped at 10 mg/kg (or 50 mg/kg for the 50 ppm grade); D2 commonly allows up to 2,000 mg/kg (0.2 %).
- EN590 has a higher minimum cetane number (51 vs 45), giving cleaner, quieter combustion.
- Modern Euro 4–6 engines with DPF/SCR systems need EN590; D2 can damage after-treatment systems.
- Always confirm the exact specification table and test methods in the contract, not just the product name.
- Insist on independent load-port inspection (SGS, Intertek or Bureau Veritas) for either grade.
Why the distinction matters
"Diesel" is not one product. In international trade, the two names buyers encounter most often are EN590 and Gas Oil D2. They look similar in a sample bottle, both are middle distillates from crude oil refining, and both power compression-ignition engines. But their specifications, regulatory status and best-fit applications differ substantially, and buying the wrong grade can mean failed customs clearance, damaged engines or rejected cargoes.
This guide explains the differences in practical terms for importers, distributors, fleet operators and power producers.
What is EN590 diesel?
EN590 is the European standard for automotive diesel fuel, published by the European Committee for Standardization (CEN). It is also the reference specification in many markets outside Europe, including large parts of the Middle East, Africa and Asia.
The defining features of EN590 are its ultra-low sulphur content and high cetane number. The current European on-road limit is 10 mg/kg (10 ppm) sulphur. In international trade you will also see "EN590 50 ppm", which follows the same specification apart from a 50 mg/kg sulphur limit, and is accepted in many importing countries whose national standards have not yet moved to 10 ppm.
Key EN590 parameters include:
| Parameter | EN590 limit |
|---|---|
| Cetane number | min 51.0 |
| Density at 15 °C | 820 – 845 kg/m³ |
| Sulphur | max 10 mg/kg (10 ppm grade) |
| Flash point | above 55 °C |
| Viscosity at 40 °C | 2.0 – 4.5 mm²/s |
| Polycyclic aromatics | max 8 % m/m |
| Lubricity (WSD) | max 460 µm |
| FAME (biodiesel) | max 7 % v/v |
EN590 also sets seasonal cold-flow (CFPP) classes so that fuel does not wax in winter, and limits water, ash and contamination.
What is Gas Oil D2?
"D2" is a trade name used for diesel / gas oil produced to the GOST 305 standard (originally from the former Soviet Union) or to a buyer's equivalent specification. In many contracts it is simply shorthand for an industrial or "off-road" gas oil with a less demanding specification than EN590.
Typical D2 parameters are:
| Parameter | Typical D2 value |
|---|---|
| Cetane number | min 45 |
| Density at 20 °C | max 863.4 kg/m³ |
| Sulphur | max 0.2 % m/m (2,000 ppm) |
| Flash point | min 62 °C (closed cup, general-purpose grade) |
| Viscosity at 20 °C | 3.0 – 6.0 mm²/s |
| Pour point | max −10 °C (summer grade) |
Note that test temperatures differ (for example density at 20 °C rather than 15 °C), so numbers are not always directly comparable without conversion.
The five differences that matter most
1. Sulphur content
This is the biggest difference. EN590 contains up to 200 times less sulphur than a typical D2 specification. Low sulphur reduces sulphur dioxide and particulate emissions and is essential for modern exhaust after-treatment systems such as diesel particulate filters (DPF) and selective catalytic reduction (SCR).
2. Cetane number
Cetane number measures how readily the fuel ignites under compression. EN590's minimum of 51 means quicker, smoother ignition, easier cold starts and less noise compared with D2's minimum of around 45.
3. Regulatory acceptance
Many countries legally require EN590 (or an equivalent ultra-low-sulphur national standard) for road fuel. D2 is typically restricted to industrial, agricultural, marine or power-generation use. Importing D2 for retail road use where regulations require ULSD can result in customs rejection or penalties.
4. Engine compatibility
Euro 4, 5 and 6 engines, and many modern construction and agricultural machines, are designed for ultra-low sulphur diesel. Running them on high-sulphur fuel can poison catalysts, block filters and void warranties. Older or simpler engines, industrial boilers and many stationary generators tolerate D2.
5. Price
D2 is generally cheaper because it requires less refinery processing (hydrotreating). However, the price gap should always be judged against market benchmarks; an EN590 offer priced like D2 is a warning sign.
Which grade should you buy?
Choose EN590 10 ppm if you supply retail fuel stations or fleets with modern vehicles, or if your national standard requires ULSD. Choose EN590 50 ppm where national standards permit it and buyers want lower cost than 10 ppm. Choose D2 for boilers, furnaces, diesel power plants, mining equipment and other industrial applications where regulation allows higher sulphur.
Origin and compliance
Because the GOST 305 standard is associated with Russian refining, buyers must be especially careful about origin. International sanctions affect Russian-origin petroleum products in many jurisdictions. Elite Petro only offers D2 and EN590 from refineries in non-sanctioned jurisdictions, with certificates of origin and full chain-of-custody documentation. See our Quality & Compliance page.
Inspection: never skip it
Whichever grade you buy, quality and quantity should be certified at the load port by an independent inspection company such as SGS, Intertek or Bureau Veritas, against the exact specification table in your contract. The certificate of quality should list each parameter, the test method and the result. If a seller resists independent inspection, walk away.
Common red flags in diesel offers
- Prices far below published benchmarks (Platts, Argus) with large "discounts".
- Requests for upfront fees, "dip test" fees or payments to personal accounts.
- Vague specifications with no test methods.
- "EN590 via D2 refinery" claims without documentation.
Read our full guide to avoiding fraud in commodity trading.
Summary
EN590 and D2 serve different purposes. EN590 is a tightly specified, ultra-low sulphur road fuel; D2 is an industrial gas oil with higher sulphur and lower cetane. Match the grade to your regulations and equipment, write the complete specification into the contract, and verify every cargo with independent inspection.
Ready to source diesel? Request a quote for EN590 diesel or Gas Oil D2.
About the author: The Elite Petro Trading Desk (Petroleum & Energy Division) at Elite Petro Trading & Facilitation works daily with buyers, suppliers, inspectors and banks across the energy, agriculture and metals markets. This article is general information, not legal or financial advice; always confirm specifications and regulations for your transaction.



